Emitters Properties

Property Name	Description
Air Outlet Position	1-Front 2-Back 3-Top Assigns one of the sides the Air Outlet panel be placed. For Twin type convector the Air outlet be positioned only on Top and for Stacked type on Front/Back.
Box \| Height Box \| Length Box \| Width	`Positive <numeric value>` Sets dimensions of sides of radiator box.
Connection \| Side	1-RHS 2-LHS Sets inlet and outlet connections to either Left or Right side of unit.
Convector \| Type	1-Twins 2-TwinTube 3-Stacked Sets one of the types of convector to Sill Twin and Trench Twin convectors. Single By default, sets type of convector Single to Sill Single and Trench Single convectors.
Depth	`Positive <numeric value>` Sets depth dimension of convector body.
Connection 1 \| Length (L1) Connection 2 \| Length (L2) Connection 3 \| Length (L3) Connection 4 \| Length (L4)	`Positive <numeric value>` Sets the straight length of connection at End1 End2 End3 End4 respectively. In radiators End1 is usually used for Inlet and End2 for Outlet.
Connection \| End Type	fl `-<numeric value>` Sets and sizes end with a flange connection. m `-<numeric value>` Sets and sizes end with a male connection. fe `-<numeric value>` Sets and sizes end with a female connection. Separate End Type entries for each End Spec with a semi colon. Example: fl-2;fe-.13 creates a flange at End1 with size 2, and a female connection at End2 with an overall reduction of component's dimensions of .13
Flow \| Connection Side	1-Left 2-Right 3-Both Sets either or both of sides on radiator box for flow connection.
Flow \| Length	`Positive <numeric value>` Sets the straight length of Flow connection.
Flow Location	1-Panel 1 2-Panel 2 3-Panel 3 Assigns location of flow connection on one of the panels. The flow locations free to set are based on what Panel Type is set.
Flow \| Outer Diameter	`Positive <numeric value>` Sets outer diameter of flow connection. Keeps Return diameter same.
Flow Top Offset	`Positive <numeric value>` Sets the offset distance between the flow connection and the top of the unit.
Flow Valve Type	1-Thermostatic 2-Non Thermostatic Sets type of flow valve to either one.
Inlet \| Length	`Positive <numeric value>` Sets the straight length of Inlet at End1.
Length	`Positive <numeric value>` Sets length dimension of convector body.
Mounting Height Mounting Length Mounting Width	`Positive <numeric value>` Sets dimensions of sides of mounting unit on radiator panel.
Convector \| No. of Bars	`<integer>` Sets number of bars to outlet panel of equipment.
No. of Grille Bars	`<integer>` Sets number of grille bars on grille surface on the device.
Number Of Sections	`<integer>` Sets number of sections in radiator column.
Outlet \| Length	`Positive <numeric value>` Sets the straight length of Outlet at End2.
Panel Type	1-Single 2-Double 3-Tripple Sets number of panels in radiator unit. The flow locations free to set are based on what Panel Type is set.
Radiator Type	1-Panel 2-Convector Sets type of radiator to either one.
Return \| Connection Side	1-Left 2-Right 3-Both Sets either or both of sides on radiator box for return connection.
Return \| Length	`Positive <numeric value>` Sets the straight length of Return connection.
Return Location	1-Panel 1 2-Panel 2 3-Panel 3 Assigns location of return connection on one of the panels. The return locations free to set are based on what Panel Type is set.
Return \| Outer Diameter	`Positive <numeric value>` Sets outer diameter of return connection. Follows Flow diameter.
Return Top Offset	`Positive <numeric value>` Sets the offset distance between the return connection and the top of the unit.
Return Valve Type	1-Thermostatic 2-Non Thermostatic Sets type of return valve to either one.
Width	`Positive <numeric value>` Sets width dimension of convector body.